Smarter use of wood can help cool the planet
International study shows combination of manufactured wood products and bioenergy with carbon capture can play a critical role in achieving climate neutrality
Dr. George Bishop, August 2026
A major new international research study has demonstrated an effective way to use wood to achieve long-term global cooling.
Led by researchers at the University of Galway as part of the InformBio project, the study examined the combination of using low-value wood for manufacturing before it is converted into fuel for clean energy generation with carbon capture and storage once those products reach the end of their life.
The researchers revealed that this strategy of combining forestry with “cascading” use of wood products can play a critical role in achieving climate neutrality targets and provides more resilient and long-term climate benefits than either directly burning harvested wood for energy or leaving forests unharvested.
The research has been published here in Nature’s Communications Earth & Environment.
Dr George Bishop, lead scientist on the study, based at University of Galway, said: “National climate neutrality targets cannot be met without large-scale carbon dioxide removal. Bioenergy with Carbon Capture and Storage (BECCS) provides one of the few scalable ways to deliver permanent carbon removal while also producing renewable energy. Our research shows that cascading wood use into BECCS is a robust climate change mitigation option that consistently delivers long-term temperature reduction.”
The research is particularly significant for countries in the EU, including Ireland, which have legally-binding commitments to reach climate neutrality by 2050 – meaning that any greenhouse gases released must either be eliminated or balanced by an equal amount removed from the atmosphere.
Achieving Ireland’s 2050 net-zero target faces major challenges. While emissions are falling, a large share comes from hard-to-abate sectors – including agriculture, aviation, and heavy industry – where deep emissions cuts are technically difficult and costly (as well as disruptive!). As a result, unavoidable emissions are expected to remain high even with the most ambitious decarbonisation measures.
BECCS has been identified as a potential solution to this challenge! As trees grow, they absorb carbon dioxide from the atmosphere and store it in their biomass. When forests are harvested, some wood becomes low-value leftovers that are often burned for bioenergy, releasing the carbon back into the air. With BECCS, this CO₂ can be captured and permanently stored deep underground – effectively removing the greenhouse gas from the atmosphere forever. This delivers a scalable source of “negative emissions”, essential for offsetting residual emissions, whilst also generating energy.
However, large-scale deployment of BECCS infrastructure is expected to take decades.
The research team outline an opportunity: rather than burning low-value wood immediately, these materials can first be used to manufacture products such as particleboard.
This offers dual wins: it generates immediate climate benefits by replacing carbon-intensive materials like plastics, and “buys time” for BECCS deployment.
At the end of their service life, these wood products can still be used for bioenergy – but this time in a BECCS facility which has had time to be deployed. At the same time, sustainably managed forests regrow to replace harvested trees, continuing to draw carbon dioxide from the air, acting as a carbon vacuum.
This we show in our new study! Using dynamic LCA, the study demonstrates that this combined cycle creates a durable carbon removal pathway with a significant long-term cooling effect, supporting climate-neutrality goals in Ireland and globally.
Professor David Styles, co-author and Professor in Agri-sustainability, University of Galway, said: “The implication for policy is clear: to meet ambitious climate targets, governments must prioritise the development of permanent carbon dioxide capture and storage technologies and incentivise circular use of wood to prolong its lifespan as a carbon store. By integrating sustainable forest management with circular and cascading wood strategies and BECCS, the global community can ensure a more durable and resilient path towards climate stabilisation.”
Dr James Gaffey, co-author and Project Lead at Munster Technological University, said: “The results of this study highlight the need for greater investment in carbon capture and storage infrastructure in parallel with cascading circular bioeconomy and renewable energy developments. The results are relevant for Ireland and for other EU member states and the approach will help them to meet their climate obligations and avoid future risks of penalties.”
The research also highlighted an interesting analysis of the comparison between active forest management and leaving forests unharvested. While unharvested forests provide strong near-term cooling, their carbon sink strength diminishes as trees mature, and carbon stored in living forests is increasingly vulnerable to climate-driven disturbances such as wildfires, pests, and disease.
Dr Bishop added: “If we transfer carbon from forests to geological stores via a cascade of multiple wood uses we enhance the longevity and resilience of carbon dioxide removal from the atmosphere. Our sophisticated modelling shows that cascading wood use into Bioenergy with Carbon Capture and Storage eventually surpasses the climate benefits of unharvested forests.”
The research was supported by Ireland’s Department of Agriculture, Food and the Marine through the InformBio project, and was a collaborative study involving experts from the University of Galway, MTU, and IEA Bioenergy BECCUS strategic project members from Chalmers University of Technology, Sweden; KTH Royal Institute of Technology, Sweden; University of New England, Australia; Bangor University, Wales; DBFZ, Germany; VTT Technical Research Centre of Finland; and other leading institutions.
More Information
What is BECCS?
Bioenergy with Carbon Capture and Storage (BECCS) is a climate change solution that combines renewable energy generation with permanent carbon removal. Biomass – such as wood, crop residues, or other plant material – is used to generate energy, and the carbon dioxide (CO2) released during this process is captured before it enters the atmosphere. This captured CO2 is then compressed and transported, via pipelines or ships, to specially selected geological storage sites. These storage sites – often in other countries – are typically deep underground rock formations, such as depleted oil and gas fields or saline aquifers, where the CO2 is permanently and safely sealed away. The CO2 remains trapped under layers of impermeable rock, preventing it from leaking back into the atmosphere for thousands of years. By combining biomass energy with this permanent storage, BECCS not only generates renewable energy but also actively removes carbon from the atmosphere, allowing countries without suitable local geological storage options to contribute to global carbon removal through international CO2 transport and storage networks. Because the carbon in biomass originally came from the atmosphere while the plants were growing, BECCS can effectively remove CO2 from the air, producing what are known as negative emissions.
The study
This study, titled “Cascading wood use into bioenergy with carbon capture and storage ensures continuous and enduring temperature reduction” applies a two-stage, multi-scale approach to assess the climate mitigation potential of BECCS. It first quantifies the global warming impacts of converting sawmill wood residues into bioenergy, with and without CCS, comparing immediate bioenergy use to a cascading pathway in which the wood is first manufactured into particleboard. The analysis also examines how the mitigation value of these pathways stands up to different levels of decarbonisation. Crucially, the analysis explicitly accounted for the specific timing and magnitude of emissions and removals over many years.
The study then extended this assessment in the second part by integrating this time-dependent emissions accounting with the progressive deployment of CCS infrastructure and the gradual decarbonisation of the country through time. By modelling these transitions together, it provides a more nuanced and realistic understanding of the performance of BECCS over time, moving beyond the simplified representations of previous analyses.
Another major advance in the modelling used in this study is the linking of detailed technology-level carbon accounting directly with dynamic forest ecosystem modelling, which enables a direct comparison between wood-use pathways and the scenario of leaving forests unharvested.
What is IEA Bioenergy BECCUS strategic project?
Through international collaboration of world-leading experts, this project aims to 1) facilitate cross-sector learning on Biobased Energy, Carbon Capture, Utilisation & Storage, 2) shed light on (bio)energy system integration and deployment of bio-CCUS and 3) address CO2 mitigation potential of bio-CCUS. It will enable a more systemic consideration of how to take different bio-CCUS applications to deployment. https://task40.ieabioenergy.com/inter-task-beccus-2-0/